The 07U series rack and pinion actuator uses a double piston design to generate high torque while maintaining a small envelope. The actuators are available in double acting and spring return versions for both 90° and 180° actuation. A position indicator provides a visual guide to the unit's position and can be removed for manual override. The high cycle life and compact size combine to support the industry trends toward automation and downsizing.
Unit of Measure

Actuator Type

N/A 90º Double Acting

Maximum Operating Pressure

N/A 140 psig at 70 ºF (960 kPa at 21 ºC)

Operating Temperature Range

N/A 13 to 200 ºF-25 to 95 ºC

Air Supply Connection

N/A 1/8 Female NPT


N/A 3.0 to 3.4 lb1.2 to 1.3 kg
Cycle Time1 N/A 25 s


N/A Safety
Shaft position indicator:
  • shows position of actuator
  • Can be removed to allow manual override.
Fail-safe spring return option.

Double piston design reduces envelope. Patented spring return cartridge saves space. Single unit may be used to actuate one or two valves.

Long cycle life. Acetal piston guides and rings reduce friction. Internally lubricated seals, bearings and guides require no further lubrication under normal conditions.

Anodized body and epoxy-coated end caps provide corrosion protection. Stainless steel brackets.

Actuates larger, high pressure single and multiport valves (7115, 7165, 1200, 7644, 7670, 7900, 7B).

90º and 180º operation. Double acting and spring return. Uses standard shop air.
Optional position monitor and solenoids:
  • allow electronic control,
  • are available in weather-proof and explosion-proof enclosures.


N/A For actuators operated by other media, such as water or hydraulic fluid, contact your local distributor.

Use with Valve Series

N/A One Valve 7222, 7223, 7092, 7093, 7B Two Valves 7222, 7223, 7092, 7093
  • 1 Based on 80 psig air and 1/4" supply line.
Site Created by Thomas Web Solutions and Powered by Navigator PlatformCopyright © 2016 HOKE, All Rights Reserved.
HOKE TÜV Certification TÜV Certification CIRCOR UK