Item # 0713A6H, Space Saver™ Actuators On Hoke Inc.

Registered Users – Sign In

Search Catalog



	CAD Products Space Saver™ Actuators


CAD Products > Actuators > Space Saver™ Actuators > Item # 0713A6H


	Item # 0713A6H, Space Saver™ Actuators

Specifications

Actuator Type

180º Spring Return

Housing Material

Polyurethane coated aluminum

Maximum Operating Pressure

125 psig
9 bar

Air Supply Connection¹

1/8 Female NPT

Operating Temperature Range

0 to 400 ºF
-18 to 204 ºC

Cycle Time²

1 s

Min. Cycle Life

250000 cycles

Weight

1.7 lb
0.75 kg

Features & Benefits

Saves space

Compact dimensions (2.25" x 2.75" x 3.5")
One Space Saver actuator can operate two valves simultaneously
Hoke DL and TL ball valves are available for high cycle applications
Available as 90°/180° spring return and double acting
Operates with many clean gases (air, natural gas, nitrogen) for added flexibility
Minimal number of moving parts for reduced maintenance
Corrosion resistant polyurethane coated aluminum housing for added durability
High burst strength for enhanced safety
Manual override for emergency operation
Rapid response time of one second or less per cycle
Unique piston gear drive assembly allows for wide range of uses
Choice of two operating temperature ranges (A4, A5 models)
Special High Tolerance NPT Thread

Materials of Construction

Polyurethane coated aluminum housing
Aluminum, anodized and PTFE coated geared piston
316 stainless steel geared output shaft
Filled PTFE shaft bearing
Reinforced polyamide polymer liner
Nitrile seals (A4 models), Viton® seals (A5 models)
Alloy steel springs with corrosion resistant coating

Factory Assembly

To order factory assembled, additional information is required

For Spring Return 90º actuators, normally open or normally closed must be specified.
For Spring Return 180º actuators, spring return position must be indicated on order.
Order must also state "factory assembled".
For specific information on ball valves, refer to Hoke’s High Cycle Ball Valve Catalog #79067. DL or TL Series ball valves should be used for high cycle applications.
Example: 0722A4 normally open actuator with 7115G6Y ball valve and 0700K3 mounting kit, factory assembled.

Field Assembly

To order the valve and actuator for field assembly, the valve number, actuator number and mounting kit number must be specified. Example: 7122F4Y TL ball valve with 0722A4 actuator and 0700K3 Mounting Kit, for field assembly.

¹ The air line supplying and venting the actuator must not restrict airflow. Orifice size of air supply valves should be 3/32" minimum (2.4 mm) to assure full actuator torque output.
² Dependent on air supply
Cycle time should not exceed 10 cycles per minute when operating continuously. DL or TL ball valves are recommended for higher cycle times.

MORE IMAGES


	· Space Save Actuator with 2-Way Ball Valves

	· Unique Piston

	· Mounting Dimensions

	· How to Order

	· Torque Specifications

DOWNLOADS


		Catalogs & Assembly Instructions

COMPATIBLE VALVES



	Flomite 71 Series

Item # 0713A6H, Space Saver™ Actuators