HOKE
CertificationsCertifications
3-way Trunnion Valves
Developed for high pressure, side-loading applications, the 316 stainless steel trunnion is supported and held securely in position by two composite bearings. Encapsulated Nylatron seats provide a positive seal, resulting in leak-tight sealing between all ports to 6000 psig differential, reducing operating torque and increasing cycle life. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.

Typical Applications
  • Compressed natural gas dispensing
  • Instrument air lines
  • Sampling systems
  • 2-way gauge readout of line pressure
  • Down hole control systems on off shore drilling platforms
  • Unit of Measure

    End Connections

    N/A 3/8" Gyrolok

    Body Material

    N/A 316 Stainless Steel

    Operating Pressure Range

    N/A 6000 psig at 70° F (414 bar at 21° C)

    Operating Temperature Range

    N/A 0 to +250 ºF-18 to +121 ºC

    Orifice

    N/A 0.187 in4.70 mm

    Cv

    N/A 0.56

    C

    N/A 2 1/2 in64 mm

    E

    N/A 4 1/16 in104 mm

    G

    N/A 1 1/8 in27.0 mm

    H

    N/A 2 25/32 in71 mm

    H1

    N/A 29/32 in23 mm

    Panel Hole

    N/A 57/64 in22.6 mm

    Panel Thickness

    N/A 3/16 in4.8 mm

    Features & Benefits

    N/A
  • Blowout-proof stem for added safety
  • Trunnion design assures leak-tight sealing at full 6000 psig (414 bar) diff erential pressure for high pressure applications.
  • Handle points to port in use or to closed position, providing a visual cue and improved safety.
  • Encapsulated dual Nylatron seats and Viton stem seals ensure a leak tight seal. This combination provides greater valve reliability.
  • Special High Tolerance NPT Thread
    Site Created by Thomas Web Solutions and Powered by Navigator PlatformCopyright © 2020 HOKE, All Rights Reserved.
    HOKE TÜV Certification TÜV Certification Certification