Spun Sampling Cylinders,Hoke dot 3E Sample Cylinder,1.5"(3.81cm)
Unit of Measure



N/A 4.00 in101.6 mm

Basic Material

N/A 316 Stainless Steel

Min. Volume

N/A 100 cc60.1 in³

Max. Weight

N/A 7.5 lb3.4 kg
Overall Length1 N/A 9.5 in241.3 mm
SND2 N/A 1.0 in25.4 mm


N/A 0.250 in


N/A 1/4-18 NPT

Operating Pressure

N/A 1800 psig124 bar

Typical Applications


  • Sampling hydrocarbons in refineries and petrochemical plants
  • Gas sampling for chromatographic analysis
  • Snubbers in reactor feed lines
  • Surge accumulators in high pressure gas systems
  • High vacuum systems as experimental chambers and molecular sieves
  • Chemical reaction vessels

Features & Benefits


  • Manufactured and tested to DOT 3E or 3A requirements
  • Each cylinder is identified with the HOKE logo
  • Cylinders are rated to 1800 psi
  • Choice of 7 capacities, ranging from 75 cc to 3785 cc (1 gallon)
  • Cylinder heads are formed by utilizing spinning process for consistent strength, size and dimensions.
  • All interior surfaces are sandblasted for a clean, even surface.
  • Neck ring and cap standard on 2250 cc and 3750 cc.
  • Thread ends per ANSI B1.20.1
  • All cylinders are hydrostatically proof-tested at 3000 psig (206 BAR).
  • 150cc, 300cc, 500cc and 1000cc sizes are available as TPED - Approved
  • Special High Tolerance NPT Thread

For Your Safety

N/A It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.

  • 1 ±0.10 in (±2.5 mm)
  • 2 ±0.02 in (±0.5 mm)
Site Created by Thomas Web Solutions and Powered by Navigator PlatformCopyright © 2020 HOKE, All Rights Reserved.
HOKE TÜV Certification TÜV Certification Certification