Catalog

CAD (0) ▾

Request Information Add to CAD Cart

Using the 2-valve manifold
In normal operation the "isolate" valve is open while the "vent" valve is closed.
To remove the instrument, first close the "isolate" valve, then open the "vent" valve to relieve pressure upstream of the "isolate" valve.

Note: The body & trim parts on all 316/316L Valves & Manifolds comply to NACE MR-01-75 & NORSOK M-650 as standard.

Unit of Measure

Specifications | Calibration Option | Pressure Equipment Directive

Specifications

Tip	N/A Hard
Packing	N/A GRAFOIL
Inlet Connection	N/A Socket Weld
Inlet Size	N/A 1/2"
Alloy	N/A Super Duplex
Weight	N/A 3.08 lb1.4 kg
Maximum pressure at 212 ºF (100 ºC)	N/A 6000 psi413 bar
Maximum pressure at 842 ºF (450 ºC)	N/A 3300 psi230 bar

Calibration Option

N/A By connecting a calibration gauge to the vent port, it is possible to check the calibration of the instrument without removing it from the installation.

Pressure Equipment Directive

N/A Due to internal bore size and internal volumes up to and including 1"/25mm, products offered in this catalogue comply with S.E.P (Sound Engineering Practice) article 3, paragraph 3 of the Pressure Equipment Directive P.E.D. 97/23/EC and therefore CE marking is not applicable.

Email ^*
First Name ^*
Last Name ^*
Company
Country ^*
Zip/Postal Code ^*
Industry
Job Function
Project Name
Project Location

Catalog

Specifications

Tip

Packing

Inlet Connection

Inlet Size

Alloy

Weight

Maximum pressure at 212 ºF (100 ºC)

Maximum pressure at 842 ºF (450 ºC)

Calibration Option

Pressure Equipment Directive

Contact Us

Prochem

Customer Help

Social