Catalog

CAD (0) ▾

Request Information Add to CAD Cart

Using the 2-valve manifold
In normal operation the “isolate” valve is open while the "vent" valve is closed.
To remove the instrument, first close the "isolate" valve, then open the "vent" valve to relieve pressure upstream of the "isolate" valve.

Note: The body & trim parts on all 316/316L Valves & Manifolds comply to NACE MR-01-75 & NORSOK M-650 as standard.

Unit of Measure

Specifications | Calibration Option | Pressure Equipment Directive

Specifications

Type	N/A Remote
Fixed	N/A 2
Tip	N/A Hard
Packing	N/A PTFE
Inlet Connection	N/A Integral GYROLOK
Inlet Size	N/A 10 mm
Alloy	N/A Titanium
Weight	N/A 3.3 lb1.5 kg
Maximum pressure at 212 ºF (100 ºC)	N/A 6000 psi413 bar
Maximum pressure at 392 ºF (200 ºC)	N/A 4000 psi275 bar

Calibration Option

N/A By connecting a calibration gauge to the vent port, it is possible to check the calibration of the instrument without removing it from the installation.

Pressure Equipment Directive

N/A Due to internal bore size and internal volumes up to and including 1"/25mm, products offered in this catalogue comply with S.E.P (Sound Engineering Practice) article 3, paragraph 3 of the Pressure Equipment Directive P.E.D. 97/23/EC and therefore CE marking is not applicable.

Email ^*
First Name ^*
Last Name ^*
Company
Country ^*
Zip/Postal Code ^*
Industry
Job Function
Project Name
Project Location

Catalog

Specifications

Type

Fixed

Tip

Packing

Inlet Connection

Inlet Size

Alloy

Weight

Maximum pressure at 212 ºF (100 ºC)

Maximum pressure at 392 ºF (200 ºC)

Calibration Option

Pressure Equipment Directive

Contact Us

Prochem

Customer Help

Social