Print Back
Bleed Valves

Typical Applications
  • Air, hydraulic systems, or natural gas
  • Venting or purging of liquids and gases
  • For use on gauge valves
  • Unit of Measure

    Specifications

    Body Material

    N/A 316 Stainless Steel

    Operating Pressure Range

    N/A 6000 psig at 70° F (414 bar at 21° C)

    Operating Temperature Range

    N/A -40 to +600 ºF-40 to +316 ºC

    Average Operating Torque

    N/A 40 in·lb

    P Thread NPT

    N/A 3/8 in

    A Open

    N/A 1 19/32 in40.0 mm

    B Hex

    N/A 5/8 in

    C Wrench Flat

    N/A 11/16 in

    Features & Benefits

    N/A
  • Compact installation
  • 316 stainless steel construction
  • Straight, union, elbow or tee flow configurations
  • Integral tube ends
  • Special High Tolerance NPT Thread
  • Safe
  • Reliable
  • Gyrolok fitting connections eliminate pipe thread leak paths
  • Operating Instructions

    N/A
  • Valve is operated by turning the bleed port nut with a wrench. Use appropriate back-up wrench to hold body, while turning bleed nut.
  • As the bleed nut is turned, pressure forces the ball off the seat. Pressure is vented through a hole drilled in the nut, angled back toward the body of the valve. Make sure flow is directed away from user.
  • Those using the valves should wear protective clothing, especially goggles.
  • No attempt should be made to repair or dismantle the valve.