Print Back
This durable line of angle pattern valves features a low profile shrouded handle which protects the valve against damage.Dyna-Pak TFE wafer packing provides a leak tight seal with low operating torque even at 6000 psi (414 bar) pressure.
Unit of Measure

Specifications

Basic Material

N/A Monel

Stem Tip

N/A PCTFE

Inlet A

N/A 1/4" male NPT

Outlet B

N/A 1/4" female NPT

D

N/A 3 3/16 in81 mm

E

N/A 1 1/2 in38 mm

F

N/A 1 3/4 in44 mm

H

N/A 1 5/16 in33 mm

Maximum Operating Pressure

N/A 6000 psig414 barg

Operating Temperature Range

N/A -20 to +250 ºF-29 to +121 ºC

Orifice Size

N/A 0.187 in

Cv Factor

N/A 0.63

Features

N/A

  • 316SS or Monel construction
  • Low profile aluminum shrouded stem handle protects stem against damage
  • Dyna-Pak packing provides leak tight seal with low operating torque
  • Packing below the stem threads prevents process fluid from contacting stem threads
  • Non-rotating hardened 17-4PH stainless steel or replaceable PCTFE stem tip prevents galling and extends valve life
  • Hardened 450 stainless steel combination packing nut and thread gland for long stem thread cycle life
  • Integral stem backseat provides added safety and prevents accidental removal of stem
  • Variety of end connections satisfy most cylinder valve applications
  • Bonnet lock prevents accidental removal of threaded bonnet
  • Angle flow pattern
  • Lock-nut secures packing nut against accidental removal
  • Flat wrench pads on body for easy valve installation
  • Integral stem backstop for added safety

For Your Safety

N/A It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.