Item # 6680G4Y, 6680 Series: Tee Valve On Hoke Inc.

CAD (0) ▾

Request Information Add to CAD Cart

Bleed Valves

Typical Applications

Air, hydraulic systems, or natural gas

Venting or purging of liquids and gases

For use on instrument manifolds

Unit of Measure

Specifications

End Connections	N/A 1/4" Gyrolok
T - Tube O.D.	N/A 1/4 in
A	N/A 2 9/64 in54.0 mm
A1	N/A 2 5/64 in53 mm
B	N/A 9/16 in
B1	N/A 5/8 in
C - Wrench Flat	N/A 7/16 in
M	N/A 1 1/16 in27 mm
M1	N/A 1 1/64 in27 mm
Body Material	N/A 316 Stainless Steel
Maximum Operating Pressure	N/A 6000 psig at 70° F (414 Bar at 21° C)
Operating Temperature Range	N/A -40° F to +600° F (-40° C to +316° C)
Average Operating Torque	N/A 40 in·lb
Features & Benefits	N/A Compact installation 316 stainless steel construction Straight, union, elbow or tee flow configurations Integral tube ends Special High Tolerance NPT Thread Safe Reliable Gyrolok fitting connections eliminate pipe thread leak paths
Operating Instructions	N/A Valve is operated by turning the bleed port nut with a wrench. Use appropriate back-up wrench to hold body, while turning bleed nut. As the bleed nut is turned, pressure forces the ball off the seat. Pressure is vented through a hole drilled in the nut, angled back toward the body of the valve. Make sure flow is directed away from user. Those using the valves should wear protective clothing, especially goggles. No attempt should be made to repair or dismantle the valve.

© 2020 — Crane Co.