Body Material
|
N/A
316 Stainless Steel
|
Operating Pressure Range
|
N/A
6000 psig at 70° F (414 bar at 21° C)
|
Operating Temperature Range
|
N/A
-40 to +600 ºF-40 to +316 ºC
|
Average Operating Torque
|
N/A
40 in·lb
|
P Thread NPT
|
N/A
3/8 in
|
A Open
|
N/A
1 19/32 in40.0 mm
|
B Hex
|
N/A
5/8 in
|
C Wrench Flat
|
N/A
11/16 in
|
Features & Benefits
|
N/A
Compact installation
316 stainless steel construction
Straight, union, elbow or tee flow configurations
Integral tube ends
Special High Tolerance NPT Thread
Safe
Reliable
Gyrolok fitting connections eliminate pipe thread leak paths
|
Operating Instructions
|
N/A
Valve is operated by turning the bleed port nut with a wrench. Use appropriate back-up wrench to hold body, while turning bleed nut.
As the bleed nut is turned, pressure forces the ball off the seat. Pressure is vented through a hole drilled in the nut, angled back toward the body of the valve. Make sure flow is directed away from user.
Those using the valves should wear protective clothing, especially goggles.
No attempt should be made to repair or dismantle the valve.
|
