Print Back
Metric
The Lapped Flange Connector is used to allow safe and easy connections between process lines and instruments. The basic, one-piece unit consists of a HOKE Gyrolok tube connection end and a 1/2” lap joint pipe flange. The flange end is dimensioned to meet “ANSI 2500” flange specifications. Available in “Smooth” or “Serrated/Concentric” seal faces, and in 316 Stainless Steel or Monel.
LappedFlangeConnectorCLFMM
LappedFlangeConnectorCLFMMDimDraw
Unit of Measure
Items LappedFlangeConnectorCLFMM
10CLFA316MM
Lapped Flange Connector: CLF/MM
LappedFlangeConnectorCLFMM
10CLFB316MM
Lapped Flange Connector: CLF/MM
LappedFlangeConnectorCLFMM
10CLFAMMM
Lapped Flange Connector: CLF/MM
LappedFlangeConnectorCLFMM
10CLFBMMM
Lapped Flange Connector: CLF/MM
Material N/A 316 Stainless Steel N/A 316 Stainless Steel N/A Monel N/A Monel
T - Tube O.D. N/A 10 mm LappedFlangeConnectorCLFMMDimDraw.JPG
A N/A 84.1 mm
B N/A 34.9 mm
C N/A 57.9 mm
D N/A 22.2 mm
E Min N/A 7.1 mm
F N/A 6.4 mm
Flange Seal N/A A N/A B N/A A N/A B
Finish N/A 3.2 - 6.3 Micrometer (Ra) N/A 6.3 - 12.5 Micrometer (Ra) N/A 3.2 - 6.3 Micrometer (Ra) N/A 6.3 - 12.5 Micrometer (Ra)