Crane Co.
Physical Address:
CRANE Instrumentation & Sampling
405 Centura CT,
Spartanburg, SC 29303-6603
Phone: (864) 574-7966
Fax: (864) 587-5608
Email: Click Here
Mailing Address:
HOKE
PO Box 4866,
Spartanburg, SC 29305-4866
Print Back
4–Position Unidirectional Electrically Operated for 5-Way Ball Valves 15 VAC and 24 VDC
Designed for the unidirectional 90°, 180°, or 270° positioning of Hoke Multimite® 5-way ball valves. Select fron 115 VAC (weather-proof) or 24 VDC (weather-proof) models. Position indicator switches are standard.

Typical Applications
  • Unidirectional 90°, 180°, 270° positioning of the Hoke 5-way Multimite® 79 Series ball valves. Select any position in desired sequence.
  • Automated instrument and process systems.
  • Test areas where remote control is mandatory.
  • For inaccessible areas where manual operation is not possible.
  • Anywhere separate low voltage power supply is required.
Explosion-proof models are suitable for Class I Group C & D and Class II Group E, F & G service. UL listing or FM approval not applied for.
Unit of Measure

Specifications

Voltage

 N/A 24 VDC

Actuator Description

 N/A Weather-Proof Unidirectional

Rated Current (Full Load)

 N/A 0.63 A

Power Consumption (Full Load)

 N/A 15 W

Torque Output

 N/A 40 in·lb

Output Speed

 N/A 6 rpm

Cycle Time

 N/A 2.5 Seconds Max for 90° Operation

Weight

 N/A 2 lb

Features & Benefits

N/A

  • Position indicator switches are standard in all models.
  • Low operating cost – power on during positioning only.
  • Weather-proof enclosure.
  • Long lasting 24 volt permanent magnet gear motors on direct current models.
  • Thermal overload protection prevents motor burnout on AC models.
  • Manual override allows manual valve operation in the event of a power failure.
  • 1/2” weather-proof conduit connection is standard; grommet is furnished for fi eld installation.
  • Can be mounted in any position.
  • Special High Tolerance NPT Thread