Crane Co.
Physical Address:
CRANE Instrumentation & Sampling
405 Centura CT,
Spartanburg, SC 29303-6603
Phone: (864) 574-7966
Fax: (864) 587-5608
Email: Click Here
Mailing Address:
HOKE
PO Box 4866,
Spartanburg, SC 29305-4866
Print Back
Metering Valve Actuators - Electrically Operated
These 115 VAC weather-proof actuators provide positioning or shut-off of Hoke 2300 series, Milli-Mite® 1300 series and Micromite® 1600 series metering valves. Models come with limit switches or feedback potentiometers.

Typical Applications
  • Positioning and shut-off for Hoke metering valves.
    Automated instrument and process systems.
  • For inaccessible areas where manual operation is not practical or remote control is mandatory.
  • Programmed sampling and process control.

Actuators may not close 2300 Series valves leak tight above 1500 psig (103 barg).
Unit of Measure

Specifications

Voltage

 N/A 115 VAC, 60 cycle

Actuator Description

 N/A Weather-Proof

Rated Current (Full Load)

 N/A 2 A

Power Consumption (Full Load)

 N/A 19 W

Torque Output

 N/A 20 in·lb

Output Speed

 N/A 10 rpm

Weight

 N/A 2.8 lb

Feedback Potentiometer

 N/A 500 OHMS, 2 Watts, Precision 10 turn (geared 1:2 for 20 turn valves).

Pilot Light Switches

 N/A 10 Amps 125-250 VAC

Features & Benefits

N/A

  • Limit switch option controls valve travel between two set points and provides pilot light indication of position.Limit switch option controls valve travel between two set points and provides pilot light indication of position.
  • Feedback potentiometer option provides means of obtaining valve position or system fl ow signal for automated close look control systems.
  • Continuous stall gear motor.
  • Low power consumption – power required during positioning of valve only.
  • 1/2 ” weather-proof conduit connection is standard; grommet is furnished for fi eld installation
  • Special High Tolerance NPT Thread