Crane Co.
Physical Address:
CRANE Instrumentation & Sampling
405 Centura CT,
Spartanburg, SC 29303-6603
Phone: (864) 574-7966
Fax: (864) 587-5608
Email: Click Here
Mailing Address:
HOKE
PO Box 4866,
Spartanburg, SC 29305-4866
Print Back
Heavy duty compact line of 316 stainless steel and Monel® forged body globe pattern valves features an integral bonnet suitable for 1/4" and 3/8" NPT ended cylinders.
Unit of Measure

Specifications

Basic Material

 N/A 316 Stainless Steel

Stem Tip

 N/A PCTFE

Inlet A

 N/A 3/8" male NPT

Outlet B

 N/A 3/8" male NPT

D

 N/A 3 in76 mm

E

 N/A 2 3/16 in56 mm

F

 N/A 1 7/8 in48 mm

H

 N/A 7/16 in12 mm

Maximum Operating Pressure

 N/A 6000 psig (414 barg)

Temperature Range

 N/A -20 to +250 ºF-29 to +121 ºC

Orifice Size

 N/A 0.187 in

Cv Factor

 N/A 0.45

Features

N/A

  • Dyna-Pak packing provides a leak-tight seal with low operating torque
  • Packing below stem threads prevents fluid from contacting threads
  • Non-rotating hardened 17-4PH stainless steel or replaceable PCTFE stem tip prevents galling and extends valve life
  • Hardened 450 stainless steel or Monel® combination packing nut and thread gland for long stem thread cycle life
  • Lock-nut secures packing nut, preventing accidental removal
  • Flat wrench pads on body for easy valve installation
  • Integral stem backstop for added safety

For Your Safety

N/A It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.