CAD (0)
▾
Fractional
The Lapped Flange Connector is used to allow safe and easy connections between process lines and instruments. The basic, one-piece unit consists of a HOKE Gyrolok tube connection end and a 1/2” lap joint pipe flange. The flange end is dimensioned to meet “ANSI 2500” flange specifications. Available in “Smooth” or “Serrated/Concentric” seal faces, and in 316 Stainless Steel or Monel.
The Lapped Flange Connector is used to allow safe and easy connections between process lines and instruments. The basic, one-piece unit consists of a HOKE Gyrolok tube connection end and a 1/2” lap joint pipe flange. The flange end is dimensioned to meet “ANSI 2500” flange specifications. Available in “Smooth” or “Serrated/Concentric” seal faces, and in 316 Stainless Steel or Monel.
Unit of Measure
Material |
N/A Monel |
T - Tube O.D. |
N/A
1/4 in
Loading zoom |
A |
N/A 3.33 in |
B |
N/A 1.38 in |
C |
N/A 2.28 in |
D |
N/A .88 in |
E Min |
N/A .19 in |
F |
N/A .25 in |
Flange Seal |
N/A B |
Finish |
N/A 6.3 - 12.5 Micrometer (Ra) |