CAD (0)
▾
fractional
HOKE Gyrolok Calibration Fittings save time and money by reducing the time required to calibrate differential pressure transmitters. HOKE’s calibration fi ttings, constructed of 316 Stainless Steel, combine a straight thread and conical metal-to-metal sealing surface on one end with a 1/4? Gyrolok tube fi tting on the other. This design allows the technician to easily calibrate the transmitter – in place – without removing the pipe plug/bleed port tap assemblies. No TFE tape ismore required. Gyrolok’s exclusive Controlled Ferrule Drive increases value - extending cycle life.
For use with Rosemount or Foxboro transmitters less
HOKE Gyrolok Calibration Fittings save time and money by reducing the time required to calibrate differential pressure transmitters. HOKE’s calibration fi ttings, constructed of 316 Stainless Steel, combine a straight thread and conical metal-to-metal sealing surface on one end with a 1/4? Gyrolok tube fi tting on the other. This design allows the technician to easily calibrate the transmitter – in place – without removing the pipe plug/bleed port tap assemblies. No TFE tape ismore required. Gyrolok’s exclusive Controlled Ferrule Drive increases value - extending cycle life.
For use with Rosemount or Foxboro transmitters less
Unit of Measure
Specifications
Material |
N/A 254 SMO |
T - Tube O.D. |
N/A
1/4 in
Loading zoom |
S - Straight Thread |
N/A 5/16-24 |
A |
N/A 2.34 in |
B - Hex Flat |
N/A 9/16 in |
C |
N/A 1/2 in |
D |
N/A .64 in |
E Min |
N/A .06 in |
F |
N/A .77 in |
G |
N/A 2.03 in |
H1 |
N/A 1 in |
H2 |
N/A .39 in |
Features & Benefits
N/A
Features: |