Item # 1751L4Y, 1700 Series - Forged Body, Integral Bonnet Needle Valves On Hoke Inc.

Registered Users – Sign In


	Item # 1751L4Y, 1700 Series - Forged Body, Integral Bonnet Needle Valves

Specifications

INLET A		1/4" male NPT

OUTLET B		1/4" female NPT

D		3 in 76 mm

E		2.125 in 54 mm

F		2 1/8 in 54 mm

H		1/2 in 13 mm

H1		1 1/16 in 27 mm

Stem Tip		PCTFE stem tip for service to +250° F (+121° C)

Body Material		316 Stainless Steel

Maximum Operating Pressure		6000 psig at 70° F (414 Bar at 21° C)

Operating Temperature Range		-20° to +250° F (-29° to +121° C)

Orifice		0.187 in 4.70 mm

Cv Factor		0.45

Panel Hole		22.6 mm 57/64 in

Panel Thickness		6.4 mm 1/4 in

Features & Benefits		Safety Lock nut secures packing nut to prohibit accidental removal Long cycle life Packing below stem threads prevents fluid from contacting the stem threads Non-rotating hardened 17-4PH stainless steel, Monel or replaceable PCTFE stem tip is combined with a hardened 450 stainless steel - or Monel thread gland to reduce galling Helps eliminate fugitive emissions Dyna-Pak packing provides a leak-tight seal with low operating torque Reliability All valves are tested for bubble-tight leakage at both seat and packing Installation variety Broad selection of male NPT, female NPT, and HOKE Gyrolok fractional or metric tube fitting connections Panel mounting Panel mounting is standard on all models Special High Tolerance NPT Thread

MORE IMAGES


	· Materials of Construction

	· Pressure vs. Temperature Curve

	· Flow Curve

DOWNLOADS


		Catalogs & Assembly Instructions

Item # 1751L4Y, 1700 Series - Forged Body, Integral Bonnet Needle Valves