Call: 864.574.7966
E-mail: Click here
Search:
By Part Number
By Keyword
Home
|
Markets
|
Certifications
|
News
|
Careers
|
Distributors
|
About Us
|
Contact Us
|
Request Information
Distributor Login
Tube Fittings &
Pipe Fittings
»
GYROLOK Tube Fittings
Pipe Fittings
Valves
»
Ball Valves
Needle Valves
Flow & Fluid Control Components
Packless Valves
Metering Valves
Plug Valves
Manifolds
Gauge Valves
Hand Valves
Double Block & Bleed Valves
HOKEBlock Valves
HOKE Monoweld Valves
Flanges &
Monoflanges
Actuators
»
Space Saver Actuators
Electric Actuators
Pneumatic Actuators
Sampling
Cylinders
»
Spun Sampling Cylinders
Formed Sampling Cylinders
Sampling Cylinder Valves and Accessories
HQC Quick
Couplings
Hydraulic
Regulators
Tools & Misc.
CAD PRODUCTS
Literature
»
Catalogs
Sales/Marketing Bulletins & Brochures
Technical Resources
Service, Repair, & User Guides
Safety & MSDS
Technical Articles & White Papers
News Articles & Press Releases
Certifications, Licenses & Approvals
Case Studies & Testimonials
Registered Users
–
Sign In
CAD Products
>
Tube Fittings & Pipe Fittings
>
Gyrolok Tube Fittings
>
Tool & Accessories
>
Gyrolok® Marking Tool
>
Item # 10GMT
Download PDF
Download PDF
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # 10GMT, Gyrolok® Marking Tool
larger image
Tube fitting users have long recognized that proper tube and tube fitting system function requires good tubing preparation followed by the use of correct installation procedures. Improper ferrule set in any flareless tube and fitting system may be the result of burrs created during the tube cutting process, improper tube insertion into the fitting, or inadequate tightening of the fitting nut. In order to maximize tube and fitting system performance and safety, HOKE offers several tool options combined with detailed installer training. The Gyrolok® Marking Tool provides the installer with an economical means of ensuring both proper tubing insertion into the fitting and adequate nut tightening.
Specifications
·
Usage Instructions
Specifications
SIZE
5/8
Usage Instructions
1.Squarely cut tubing, preferably with a tube cutter, and then deburr both inside and outside diameters as necessary.
2. Firmly insert tubing into the tool as far as possible.
3. Mark the tubing, as shown, with a pencil or FINE POINT marker utilizing low chloride ink.
4. Firmly insert the marked tubing into the Gyrolok® fitting to which it will be assembled. Finger-tighten the nut. The mark should NOT be visible at this point. If not visible, continue to step 5. If any part of the mark is visible above the Gyrolok® nut after only fingertightening, the tubing is either not properly seated within the fitting or a ferrule is missing. Disassemble and determine cause.
5. If the mark is not visible after finger-tightening, continue by following appropriate Gyrolok® assembly instructions for tubing O.D. and wall thickness.
DOWNLOADS
Catalogs & Assembly Instructions
Site Created by
Thomas Web Solutions
and Powered by
Navigator Platform
Copyright © 2013 HOKE, All Rights Reserved.